PRO/pak

Everything you need is contained in one package that attaches to the end of your 1"  or 1.5” fire hose. The PRO/pak has a high impact 2.5 gallon foam reservoir with a built-in eductor that can be set to the ratio of foam or wetting agents being used. A large, easy-open fill port has an indicator to show the type of liquid in the tank. The flow is controlled by a twist grip valve/carrying handle. Select the discharge velocity that meets your needs for inlet pressures between 40 and 500 psi. The nominal flow is 12 gpm at 100 psi. A shoulder strap is included for extended operations. The PRO/pak Portable Foam System is supplied with three different quick connect nozzles, a discharge hose and a cap. The straight-stream nozzle gives maximum reach and penetration. The low-expansion nozzle works well with Class A and B foam solutions where reach is more important than expansion ratio. The medium-expansion nozzle produces dense foam that is best for vapor suppression and longevity. Use the PRO/pak when time is critical and you need a small blanket of foam. For example: With one tank of 1% concentrate the PRO/pak can make 15,000 gallons of finished foam using 250 gallons of water in 21 minutes, based on 60:1 expansion from the medium-expansion nozzle. High-impact engineering plastic with metallic components of hardcoat anodized aluminum and stainless steel.